The Smart-Base™
Electronic Programmable Inbuilt Baseboard Thermostat
[+]image
The Smart-Base™
Available Downloads
- Owner's Guide : 896.7 kB
- Programming Guide : 493.2 kB
- Spec Sheet : 128.5 kB
Features and Benefits
- Save up to 28% on your heating bill
- 5-1-1 programmable thermostat with 4 daily programs
- Precise 2° comfort range with digital temperature sensing
- Convenient push-button control
- Digital display screen for easy viewing:
Actual room temperature, time, day - Use with 208/240 volt Cadet "F" Series electric baseboard heaters
- Easy to install for new or replacement use
General Information:
Save up to 28% on your heating bill with the SMART-BASE™ electronic programmable thermostat, designed specifically for Cadet “F” Series electric baseboards. Digital temperature sensing provides a precise 2° comfort range, ensuring constant comfort. 5-1-1 programming allows you to create a heating schedule specific to your needs, for weekdays, Saturday, and Sunday. Convenient push button controls make this thermostat easy to program. The SMART-BASE™ Electronic thermostat can be installed on either end of standard Cadet 208/240 volt baseboards and is available only in double pole. Setpoint range: 41ºF to 86ºF (5ºC to 30ºC)
Architectural Information:
The SMART-BASE™ electronic thermostat shall be UL Listed. Designed to be an integral part of the Cadet “F” series baseboard. The control shall be capable of switching up to 12.6 amps, of a resistive load, at 240 or 208 VAC. Control designed to meet power surges normally found in homes. Separate single pole double throw switch included in control for separation of branch circuit from control and heater. Control shall be digital with an LCD display. After programming, LCD display will show the actual room temperature, current time of day, day of week, mode, and current status of heater. Programming of microprocessor accomplished through the use of the three buttons on the control faceplate. Control shall have "Auto Mode" consisting of 5-1-1 programming, four events for Monday through Friday and four events each for Saturday and Sunday. Control shall have a “Manual Mode” for continuous 24-hour control of a single temperature set point. No batteries are required, as the program will be maintained in memory for approximately ten years without power. Only the time and day are required to be re-entered after a power outage.
Ordering Information:
Use with 208/240 volt Cadet F Series electric baseboard heaters.
The SMART-BASE™ electronic thermostat shall be UL Listed. Designed to be an integral part of the Cadet “F” series baseboard. The control shall be capable of switching up to 12.6 amps, of a resistive load, at 240 or 208 VAC. Control designed to meet power surges normally found in homes. Separate single pole double throw switch included in control for separation of branch circuit from control and heater. Control shall be digital with an LCD display. After programming, LCD display will show the actual room temperature, current time of day, day of week, mode, and current status of heater. Programming of microprocessor accomplished through the use of the three buttons on the control faceplate. Control shall have "Auto Mode" consisting of 5-1-1 programming, four events for Monday through Friday and four events each for Saturday and Sunday. Control shall have a “Manual Mode” for continuous 24-hour control of a single temperature set point. No batteries are required, as the program will be maintained in memory for approximately ten years without power. Only the time and day are required to be re-entered after a power outage.
Ordering Information:
Use with 208/240 volt Cadet F Series electric baseboard heaters.
Click on the part number for more information.
| Part# | Model# | Description | Weight |
| 03400 | SBFT2W | Smart-Base™ Thermostat Kit Retail Pack DP, 12.6A, White | .75 Lbs |
| 03405 | SBFT2A | Smart-Base™ Thermostat Kit Retail Pack DP, 12.6A, Almond | .75 Lbs |
